24/7 Emergency Dispatch — (866) 737-2830
NJ Master HVACR Contractor Lic. #19HC00145700 · Bonded · Insured
Home All Services Coverage Map Maintenance Blog About Us (866) 737-2830
← All articles
Heating

Furnace Won't Turn On? Check These 4 Things First

Sometimes a furnace that won't start is a dead thermostat battery or a switch someone bumped. Here's what to check in five minutes, and when to stop and call.

Caution-yellow graphic with the giant word OFF? and a checklist: thermostat, furnace switch, breaker, filter.

A furnace that won't turn on on a cold night feels like an emergency, and sometimes it is. But a few simple causes are worth checking first. These are the same homeowner checks furnace makers like Trane list in their own troubleshooting guides.

1. The thermostat

  • Make sure it's set to HEAT and the set temperature is above the room temperature.
  • Replace the batteries if your thermostat uses them. A blank or dim screen is a giveaway.
  • Look for an error code on a programmable or smart thermostat.

2. The furnace power switch

Most furnaces have a power switch that looks just like a light switch, on the furnace or on the wall nearby. It's easy for someone to flip it off by mistake. Make sure it's on.

3. The circuit breaker

Check your electrical panel for a tripped breaker and switch it back on. If it trips again, stop and call a professional; that points to an electrical problem.

4. The air filter

A badly clogged filter can choke airflow and cause the furnace to shut itself off for safety. If you can't remember the last time you changed it, change it now. Also make sure supply vents and return grilles aren't blocked by furniture or drapes.

When to stop and call

  • You smell gas (rotten eggs). Leave the house and call your gas utility from outside. Don't touch switches or the thermostat. See what to do if you smell gas.
  • The breaker keeps tripping.
  • The furnace starts, then shuts off, or a pilot light won't stay lit.
  • You've checked all four and there's still no heat.

Don't open the burner compartment or keep resetting the furnace. Modern furnaces have safety switches that shut the system down for a reason, and a technician needs to find out why.

Same-day heat repair

Rescue Plumbing & HVAC offers same-day heating repair across North Jersey, 24/7. Our diagnostic visit is $79 and is credited toward the repair, and every job comes with a 1-year parts and labor warranty. See our furnace services.

Checked all four and still no heat?
Same-day heating repair, 24/7. $79 diagnostic credited toward the repair and a 1-year parts & labor warranty. Call (866) 737-2830 or book online.
Get the heat back on →
Why won't my furnace turn on?
Common simple causes are a thermostat set wrong or with dead batteries, the furnace power switch turned off, a tripped breaker, or a clogged filter. If those check out, a technician needs to diagnose it.
Where is the furnace power switch?
Most furnaces have a switch that looks like a regular light switch, mounted on the furnace or on a wall or ceiling joist nearby. Make sure it's on.
What if the breaker for my furnace keeps tripping?
Stop resetting it and call a professional. A breaker that trips again points to an electrical problem.
Should I keep resetting my furnace?
No. Modern furnaces shut down when a safety switch detects a problem. Repeated resets don't fix the cause. Call for service.
↑ Back to top More articles →
Serving